6-CHLOROHEXYLZINC BROMIDE
6-Chlorohexylzinc bromide
CAS: 135579-83-8
Molecular Formula: C6H12BrClZn
6-CHLOROHEXYLZINC BROMIDE - Names and Identifiers
6-CHLOROHEXYLZINC BROMIDE - Physico-chemical Properties
| Molecular Formula | C6H12BrClZn |
| Molar Mass | 264.91 |
| Density | 0.974g/mLat 25°C |
| Flash Point | 1°F |
| Exposure Limit | ACGIH: TWA 50 ppm; STEL 100 ppm (Skin)OSHA: TWA 200 ppm(590 mg/m3)NIOSH: IDLH 2000 ppm; TWA 200 ppm(590 mg/m3); STEL 250 ppm(735 mg/m3) |
| Storage Condition | 2-8°C |
6-CHLOROHEXYLZINC BROMIDE - Risk and Safety
| Risk Codes | R14 - Reacts violently with water R19 - May form explosive peroxides R22 - Harmful if swallowed R36/38 - Irritating to eyes and skin. R40 - Limited evidence of a carcinogenic effect R36/37 - Irritating to eyes and respiratory system. R11 - Highly Flammable |
| Safety Description | S16 - Keep away from sources of ignition. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S33 - Take precautionary measures against static discharges. S36 - Wear suitable protective clothing. S36/37 - Wear suitable protective clothing and gloves. |
| UN IDs | UN 2056 3/PG 2 |
| WGK Germany | 1 |
6-CHLOROHEXYLZINC BROMIDE - Introduction
6-Chlorohexylzinc bromide is an organic zinc compound with the chemical formula C6H11ClZnBr. It is a colorless or pale yellow liquid that is volatile in the air and has a pungent odor. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless or light yellow liquid
-Molecular weight: 276.29g/mol
-Melting point:-35 ℃
-Boiling point: about 190 ℃
-Density: 1.41g/cm³
-Solubility: Soluble in common organic solvents, such as ethanol, toluene, etc.
Use:
6-Chlorohexylzinc bromide can be used as reagents and catalysts in organic synthesis. It is often used in organic metal chemical reactions, cross-linking reactions, etc. In organic synthesis, it can be used to synthesize and modify compounds, such as the preparation of organozinc reagents, the addition reaction of olefins, etc.
Preparation Method:
The preparation of 6-Chlorohexylzinc bromide is generally obtained by reacting bromohexane with zinc chloride. The reaction is generally carried out under the protection of an inert gas, such as nitrogen or argon.
Safety Information:
- 6-Chlorohexylzinc bromide is an organic zinc compound that requires caution and compliance with relevant safety procedures.
-During use and storage, keep away from fire and high temperature, and avoid contact with oxidants to avoid fire or explosion.
-When handling 6-Chlorohexylzinc bromide, wear appropriate chemical protective clothing, protective glasses and chemical protective gloves.
-Use should ensure a well-ventilated laboratory environment or industrial place.
-In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical attention.
Nature:
-Appearance: Colorless or light yellow liquid
-Molecular weight: 276.29g/mol
-Melting point:-35 ℃
-Boiling point: about 190 ℃
-Density: 1.41g/cm³
-Solubility: Soluble in common organic solvents, such as ethanol, toluene, etc.
Use:
6-Chlorohexylzinc bromide can be used as reagents and catalysts in organic synthesis. It is often used in organic metal chemical reactions, cross-linking reactions, etc. In organic synthesis, it can be used to synthesize and modify compounds, such as the preparation of organozinc reagents, the addition reaction of olefins, etc.
Preparation Method:
The preparation of 6-Chlorohexylzinc bromide is generally obtained by reacting bromohexane with zinc chloride. The reaction is generally carried out under the protection of an inert gas, such as nitrogen or argon.
Safety Information:
- 6-Chlorohexylzinc bromide is an organic zinc compound that requires caution and compliance with relevant safety procedures.
-During use and storage, keep away from fire and high temperature, and avoid contact with oxidants to avoid fire or explosion.
-When handling 6-Chlorohexylzinc bromide, wear appropriate chemical protective clothing, protective glasses and chemical protective gloves.
-Use should ensure a well-ventilated laboratory environment or industrial place.
-In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical attention.
Last Update：2024-04-10 22:29:15
